PETG Filament Pantone Translucent - 1.75mm 3D Printer Filament
SPOOL3D

*PETG - Translucent Colours - 1.75mm 3D Printer Filament

$36.00

Create Wishlist

Close
Colour: None Selected *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Pantone colour coded filament from Spool3D.

PETG filament in translucent colours.

Print it right with Spool3D PETG 3D printer filament.  Our PETG thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

PETG filament's strength is much higher than PLA, it is FDA approved for food containers and tools used for food consumption, is BPA free, it barely warps, and produces no odors or fumes when printed. PET filament is not biodegradable, but it is 100% reclaimable. PET 3D printer filament offers excellent clarity and high gloss.  PETG is stronger than PET and is also hydrophobic, making it less susceptible to moisture problems. Consistently round diameters make this material very easy to work with.

PETG filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75mm diameter PETG (PolyEthylene Terephthalate Glycol ; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 230-250 degrees celsius
  • Optimum bed temperature: 70-80 degrees celsius
  • Colour: please choose from options (blue, green, orange, purple, red, translucent/transparent, yellow)
  • Weight: 1 kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.65 kg

Print it right with Spool3D PETG 3D printer filament. 

Spool Sizes:

  • 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm

Buy Spool3D 3D printer PETG filament online in Canada without the surprise cost of the exchange rate!

SKU: PT175-TRANSLUCENT
Manufacturer Part Number: PT175-TRANSLUCENT
Technical Data Sheet: PETG
Physical / Method / Test Condition: Typical Value
Density (ASTM D792 @ 23 ℃): 1.27 g/cm3
Melt Flow Rate (ASTM D1238 @ 250 ℃/2.16KG): 22 g/10 min
Tensile Strength (ASTM D638 50mm/min): 50 MPa
Elongation at Break (ASTM D638 50mm/min): 150 %
Flexural Strength (ASTM D790 5 mm/min): 68 MPa
Flexural Modulus (ASTM D790 5 mm/min): 2100 MPa
Notched Izod Impact Strength (ASTM D256 @ 23℃): 103 J/m
Printing Temperature: 230 - 250 ℃
Heat Distortion Temperature (ASTM D648 0.45MPa): 68 ℃

Reviews

5 out of 5 (based on 4 ratings)
leave a review

PETG Translucent Red

First time I've printed with PETG on my Creality CR10S Pro V2. Nozzle at 240C, bed at 70C. PETG Translucent Red filament. It worked very well for my application (business card holders), there was a slight bit of stringing but nothing too bad. The print came out very strong, much stronger than standard PLA, no fumes, easy to work with. This filament looks like a rich ruby red, quite nice.
Posted by Glen, October 17, 2023

Translucent purple petg

Really easy material to work with, prints nice, great later adhesion
Posted by Aaron k, May 01, 2023

PETG Translucent Purple

Out of the box, this material was globby and jammed up hard when I tried to first use it to do a temp tower. I dried it out and it's been just as awesome to print with as the solid version, but way more gorgeous. Awesome rich purple colour with just 0.9mm wall thickness, and a great sheen that makes features pop. I will be buying other colours to do decoration stuff with, this material loves vase mode! My Prusa Mini prints this at 230/85 first layer, 235/90 other layers (full 230c if thin).
Posted by Rick, July 19, 2022

Transluscent PETG

Looks great, though this is the hardest PETG Filament I've had to print with. it clogged one of my printers multiple times and somehow still gets ground up and stuck by my other printer's gear with 20mm/s retraction speed and 3mm retraction distance (250c)
Posted by Jari Christopherson, November 23, 2019

Related Products