Matter3D Performance PLA Wood Fill 1.75mm 3D Printer Filament


Create Wishlist

Current Stock: 35

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Current stock can be wound either on plastic spools or cardboard spools due to supply delays.

No artificial wood product is used so shade of wood PLA varies and is random depending on the wood fibers used.

Matter3D’s Wood Fill Performance PLA is formulated using genuine Vancouver Island wood fibers (10%) and the same great NatureWorks 3D850 resin as their other Performance line products. This engineering-grade Wood Fill PLA has higher bulk crystallization and is developed for high-heat (< 85 °C) and high-strength applications (stronger than most ABS materials).

Performance PLA - Wood Fill is ideal for functional jobs, where greater heat resistance and impact strength are desired. This material saws well, sands well, and takes paint extremely well. Compared to other Wood Fill - PLA materials, that may not even contain real wood, Matter3D’s Wood Fill is made from genuine Vancouver Island cedar pulp. It even smells authentic when you print it! We recommend printing with a 0.6 mm nozzle; however, if you have your printer dialed in, it is possible to print using a 0.4 mm nozzle.

Similar to their other Performance PLA products, the Wood Fill line offers the same ease of PLA printing without sacrificing print quality, compatibility, reliability, or part-performance.

Any parts made with Matter3D’s Performance PLA can be heat treated (annealed) to improve the material's physical properties. To anneal a printed part, heat the part at 80 – 130 °C for up to 30 minutes by either submerging in hot water or by baking in an oven.

Matter3D’s Performance PLA is precision extruded and immediately vacuum-sealed before shipping with desiccant for protection against moisture. This product is available in 1 kg spools (2.2 lbs). Matter3D always recommends drying your filaments before use.

This filament is ideal for use with practically all desktop 3D printers, such as Makerbot, Prusa, Ender, Flashforge, Anet, Creality, Lulzbot, Makergear, Ultimaker, or any other printer accepting 1.75 mm filament.

Proudly compounded and manufactured in Canada!

Performance PLA Technical Data Sheet


  • Product Name: Performance PLA – Wood Fill
  • Product Code: FIL-1020-00-10-WOD
  • Diameter: 1.75 +/- 0.05mm
  • Weight: 1 kg
  • Length: 350 m
  • Density: 1.20 g/cc
  • Nozzle Size: ≥ 0.6 mm recommended.
  • Nozzle Temp: 215 – 245 °C this type of PLA resin requires higher temperatures
  • Bed Temp: 25 – 75 °C
  • Bed Prep: Hairspray, Glue Stick, Polyimide (Kapton) surface
  • Layer Height: ≥ 0.1 mm
  • Print Speed: ≤ 100 mm/sec

Buy Matter3D 1.75mm performance PLA Wood Fill 3D printer filament in Canada without the surprise cost of the exchange rate!

SKU: FIL-1020-00-10-WOD
Manufacturer Part Number: FIL-1020-00-10-WOD


There are no reviews for this product yet.
leave a review