Fun To Do - Standard Blend - CLEARANCE
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
Fun To Do Standard Blend resin is a real multi purpose resin, most cost effective for printing your day to day objects. The fully cured resin has a hardness of 35 shore D.
Available in Red, black and unpigmented.
All Fun To Do resins are designed to be ultra fast!
Curing times of 0.5 seconds for 0.02mm layers are easily achieved on standard DLP printers with an average light source of around 240Watts.
A broad range of reactivity!
The resin have a very broad range of reactivity. It extends from the very short wavelengths of 225nm, to the near/visible wavelengths of 415nm. By incorporating a very smart blend of photo initiators and sensitizers, almost any light source can be used to initiate the polymerization process of our resins. No need to modify your expensive DLP projector! Do you have a laser SLA machine, or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!
Besides the wavelength of the light source several other factors are important, so please check out the properties page. If you are in doubt if your specific machine is compatible with our resins, just send an e-mail to Fun To Do.
The Fun To Do resins have an ultra low shrinkage!
Where 3.5% is regarded little shrinkage, they have the limited the shrinkage to 0.5%.
It is basically what you see is what you get. 3.5% seems to be little but if you take an object of 10cm (100mm) 3.5% is 3.5 mm which is nearly half a centimetre! This is huge compared to the 0.5mm the Fun To Do Resins achieve.
A natural resistance to water and most chemicals!
Fun To Do resins have a natural resistance against water - in liquid form it is highly hydrophobic. Once fully cured there is hardly any chemical that can dissolve Fun To Do resins. The Industrial blend has a high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for several years now! To see which chemicals have been tested click here
User Friendliness makes you want to build more!
When designing the resins we have spent quite some effort in making the resin as user friendly as possible. These efforts have resulted in a series of low odor resins with minimal skin irritation.
Affordable resins make it possible for you to build more!
By using our affordable resin you can afford to experiment, extend your knowledge about supports, exposure times, material thickness without having to think about the costs of the materials all the time.
More technical details and properties
Years of studying and practising poly chemistry in various disciplines really pays off in the design of practical and affordable resins. Fun To Do resins are not only used in the DLP 3D printing world, but are also popular in the SLA industry.
- Rapid Prototyping
- Automotive industry
- Toy and Game industry
- Dental industry
- 1kg of Fun To Do Standard Blend resin in chosen colour
Buy Fun To Do resin online in Canada without the surprise cost of the exchange rate!