Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Fits all of the most common dual extruder printers – Flashforge Creator Pro, Powerspec Ultra, QiDi Tech, Malyan M180, Wanhao Duplicator 4s, CTC, etc.

Please note, the QiDi and CTC stock extruders are NOT compatible, so you will not be able to mix your stock and Flexion extruder. Also for QiDi, the temperature sensor location is moved and will read 10-15° low, so turn your print temperatures down.

Developed by the inventor of Ninjaflex

Flexible filament extruder retrofit kit for both left and right sides of a dual-extruder printer. Print fast with flexible materials, higher resolution, and fewer failures. Also prints ABS and PLA better than your stock extruder.

*Does not include stepper motor.

Flexible filament extruder retrofit kit for dual-extruder direct-drive machines, such as Flashforge Creator. The Flexion extruder will allow full-speed printing of ultra-flexible filaments. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works will with Ninjaflex, Filaflex, flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA.

This kit requires you to disassemble your printer’s extruder and reinstall this upgrade.

The Flexion Extruder is designed to fit as many models as possible – please see installation instructions for more details.

Works With:

Flashforge Creator, Monoprice Dual, Wanhao 4S, Powerspec Ultra, and many others.  See the Flexion support page for information on retrofitting to your printer.

Package Contents:

• Mounting block
• 2x Tensioning arm with idler and cleaning brush (one right and one left)
• 2x Adjustment cam
• 2x Drive gear
• 2x Feed barrel
• 2x Heater block
• 2x Insulation for heater block
• 6 nozzles – 2 each 0.3, 0.4, 0.5 mm orifice
• 2x Adapter shim to allow 6mm and 0.25″ heater cartridges
• 4 PTFE feed tubes
• 2 spare cleaning brushes
• All mounting hardware
• 6mm and 7mm wrench for installing nozzles
• “Flexion inside” quick-guide sticker

Note: does not include stepper motor or motor mounting screws

Buy a Flexion Extruder Kit from #Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!