Free shipping in Canada for orders over $140 before tax. (via Canada Post)
Hotends have the new heater block and thermistor cartridge introduced in June 2016.
Volcano documentation can be found here.
Volcano - Print Faster, Stronger, Bigger.
Everything you need to start exploring large format 3D-Printing! The Starter Pack is an add on for your E3D HotEnd to boost the speed of printing with vastly increased melt rates and epic layer adhesion. Another fun addition to the E3D ecosystem, and fully compatible with all E3D HotEnds except Cyclops.
The Starter Pack gives you an easy way to upgrade your HotEnd to use a high flow 0.80mm nozzle. This kit contains all the parts you need to upgrade your HotEnd to Volcano, including electronics and fixings.
An economical and simple way to get started with volcano.
Volcano is E3D's answer to slow printing. If you want large parts, in less than half the time, with dramatically increased strength then Volcano is what you need. Volcano enables you to print at high layer heights, through large nozzles, and extrude much more plastic per second. This results in dramatically reduced print times. In addition to reduced print time the large traces of filament printed by Volcano bond to one another with greatly improved strength. This results in parts that are extremely strong and feel much more solid than standard prints.
Printers are getting larger and the objects that can be printed are getting larger too. However, as prints get bigger the time taken to print these objects increases exponentially. Volcano makes huge printers viable, and manufacturing large objects much more efficient by slashing print times by more than half compared to standard printing. By combining speed and strength Volcano makes it possible to print objects a whole new class of objects like shelf brackets, large scale RepRap machines, and even furniture. Just because parts are printed with large layers doesn't mean that they are going to be inaccurate or ugly. To the contrary the large layers give a very smooth appearance, with great gloss. With a correctly calibrated machine you can stil hit part accuracies of +/- 0.1mm.
Further documentation can be found at wiki.e3d-online.com/wiki/E3D-v6_(Volcano)_Documentation
- Genuine unassembled E3D Volcano Starter Kit - 3.00mm filament; 12V 30W heater cartridge; 0.8mm brass nozzle
Buy a genuine E3D V6 hotend assembly from #Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!