E3D Online

*E3D V6 & Volcano Power Pack Kit - 1.75mm Universal

$179.00 - $185.00

Create Wishlist

Voltage *
Input Type *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

The V6 is E3D's flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, our V6 ecosystem is suited for every application.

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.


The E3D all-metal heatbreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heatbreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Key features:

  • All metal heatbreak
  • Maximum temperature: 285ºC
  • Cartridge style heater block 
  • Groove mount

v6 portion of the kit includes:

  • 1 x V6 heatsink 1.75mm
  • 1 x V6 heatbreak 1.75mm
  • 1 x V6 brass 0.4mm nozzle 1.75mm
  • 1 x V6 duct
  • 1 x V6 aluminium heater block 
  • 1 x Heater cartridge 12V or 24V
  • 1 x Thermistor cartridge
  • 1 x Thermistor extension cable
  • 1 x 30 x 30 x 10 fan 12V or 24V
  • 1 x Thermal compound
  • 1 x V6 fixings kit
  • 1 x V6 silicone sock
  • 1 x PTFE tubing 100mm or 800mm

Volcano pack + Full range of Brass Nozzles pack includes:

  • 1 x Fixings kit
  • 1 x 100mm PTFE tube 1.75mm
  • 1 x Threaded bowden coupling 1.75mm
  • 1 x 7mm spanner
  • 1 x Nozzle tin
  • 1 x 0.25mm V6 brass nozzle 1.75mm
  • 1 x 0.35mm V6 brass nozzle 1.75mm
  • 1 x 0.5mm V6 brass nozzle 1.75mm
  • 1 x 0.6mm V6 brass nozzle 1.75mm
  • 1 x 0.8mm V6 brass nozzle 1.75mm
  • 1 x 30w heater cartridge 12V or 24V
  • 1 x Thermistor cartridge 
  • 1 x Thermistor extension cable 
  • 1 x Cable tie
  • 1 x Aluminium volcano heaterblock 
  • 1 x 0.6mm Volcano brass nozzle 1.75mm
  • 1 x 0.8mm Volcano brass nozzle 1.75mm 
  • 1 x 1mm Volcano brass nozzle 1.75mm 
  • 1 x 1.2mm Volcano brass nozzle 1.75mm

Buy an E3D V6 and Volcano Power Pack from Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!

SKU: V6-175-##V-POWER


4 out of 5 (based on 1 rating)
leave a review

Received - upon first glance

Great Price and Great Shipping time ... also the Items arrived in tip top shape. However, the items were not what i was expecting. I was under the impression the Volcano Silicon Sock would have been included with the Volcano kit, but it is not , be sure to add one if you buy this kit : https://spool3d.ca/e3d-silicone-sock-for-volcano-heater-block/ and i was surprised to find out there are NO steal or abrasive resistant nozzles included in this kit either, so make sure you get them - doesn't make sense not to have them included either since that is why the volcano upgrades exist. In addition, the item descriptions need some serious updating with more informed details - seems overly generalized or the admin was in a rush, needs more attention to detail. So, if anyone wants both a standard v6 short block and a volcano big block with brass tips for both block types when switching them out, then this kit is for you; but dont forget you will need the volcano silicon sock, steal nozzles for abrasive filaments like flex carbon fiber etc. and a E3D PT100 Total Upgrade Kit if your printer is still using the old cartridge style like my CR-10S. Otherwise, if you are like me, and you want the v6 assembly and the copper volcano block for high volume and high temps then i would recommend going with the following instead: 1. V6 assembly - i would recommend the titan assembly or e3d-v6 hotend full -kit 2. Copper Volcano upgrade kit : https://spool3d.ca/e3d-copper-plated-volcano-kit/ 3. steel nozzles : Ruby is the best 4. E3D PT100 Total Upgrade Kit (CR-10s needs for block) 5. E3D Type-K Thermocouple - Cartridge Style (may or may not be needed for the block) Hope this helps ... will add another comment once done installing these upgrades etc over the next few weeks as time allows, maybe add videos to - more to follow. If i had been given a silicon sock and the descriptions doen with more detail i would have given it a 5 out of 5 service - so 4 it is ... Overall, i will always buy from Spool3D first because they are doing so well in ever other aspect of this service and then some, not to mention their prices are reasonable - keep up the great work Spool3D ... get ready for me when you get the titan aqua (with water cooler) and super volcano and tool upgrade from E3D ! :D
Posted by Derrick Anderson, February 06, 2019