*E3D Titan Aero Gold Edition - 1.75mm
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
No motor included.
The classic E3D Titan Aero upgraded with an ultra-quiet Noctua fan, hardened steel nozzle hobb, copper-alloy block, and a high precision heater cartridge.
The most desirable fan in 3D printing - renowned for its efficiency, you can count on this fan to significantly reduce noise levels.
Titan Aero Gold edition maintains the same aluminium heatsink, anodised gold to celebrate the successful unification of the V6 and Titan combination.
Compact & Rigid
By combining the V6 and Titan into a single unit, Titan Aero results in a compact extrusion system, offering you an extra 25mm of Z-axis build height in comparison to the V6 and Titan combination in a direct drive setup.
Compact in this case also means rigid. The shorter overall length with an integrated sink means Titan Aero can cope with the knocks and bumps associated with the fastest of 3D printers.
Great for flexibles
By having a short, well-constrained filament path there is less room for filament to bend, buckle and jam meaning Titan Aero is suitable for printing flexible filaments such as TPU with conservative speeds.
Titan Aero is built around the E3D V6 all-metal design, allowing you to reliably 3D print any filament up to 285°C as standard. For more information regarding maximum temperature ratings and upgrade
Easy to install, Easy to use
Titan Aero is mounted based on the standard NEMA 17 hole pattern, which allows it to be fitted to a wide range of 3D printers, making it straightforward to design custom mounting solutions for your setup. Alternatively, due to fantastic community support, there are many pre-designed mounts available on file-sharing platforms such as thingiverse.com for the most common printers on the market.
By using Titan’s custom engineering and rigorously tested extrusion system, Aero is highly reliable and retains all the smart usability features. It’s a breeze to load and unload filament, manually extrude, adjust idler tension, and clean out debris from the hobb.
The use of Titan’s 3:1 gearing ratio means it perfectly pairs with the compact but powerful motor, making for a lighter weight carriage whilst maintaining reliability and pushing power.
- ‘Gold’ Anodised Heatsink
- Maximum printing temperature: 285°C
- Plated copper V6 HeaterBlock
- Hardened steel nozzle and hobb
- 1 'Gold' anodised 1.75 mm Titan Aero HeatSink
- 1 1.75mm stainless steel HeatBreak
- 1 40 x 40 x 10 12V Noctua fan
- 1 fan extension cable
- 1 High precision 30W 12V or 24V heater cartridge
- 1 Stainless steel V6 1.75 mm HeatBreak
- 1 Plated copper V6 HeaterBlock
- 1 Hardened steel 1.75mm 0.4 mm V6 nozzle
- 1 Titan extruder fixings kit
- 1 Thermistor cartridge
- 1 Thermistor extension cable
- 1 Hardened steel Titan Hobb
- 1 Thermal compound paste
Buy an E3D Titan AERO Gold Assembly from Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!