Bondtech - Prusa i3 MK2.5/MK3 Extruder Upgrade


Free shipping in Canada for orders over $140 before tax. (via Canada Post)

This extruder upgrade kit is for the Prusa MK2.5 or the Prusa MK3 where you already have the Bondtech gears. This kit contains the necessary parts to convert to Bondtech's freshly designed extruder that uses 3:1 gearing ratio for improved precision and resolution, optimized geometry for the heat-sink cooling and many other improved features.
It also reduces the moving weight to reduce vibrations and ghosting.

The extruder parts are not optimized for FDM printing but for SLS printing that Bondtech uses to produce the housing parts in polyamide 12 for maximum precision and strength.

This kit comes with this 25 mm pancake stepper that have 18 Ncm in torque for a lightweight but powerful extrusion and a new stepper cable for connecting the motor.

The original part-cooling fan 50x15 radial fan is used in this setup and is not included.

The original 40x40x10 heat-sink cooling fan is used in this setup and is not included.

The original filament sensor cover is used and is not included.

This extruder will fit the carriage on the MK2.5 / MK3 but it also fits the Zaribo, Veckoj carriage, a new version of the Bear carriage especially made for this is in the works and should be available shortly.

The E-steps needs to be updated to 415 for MK2, MK2s and MK2.5 and is easy to do by downloading this g-code file, put it on the SD card and select to print the file esteps.gcode which will set the esteps and save it. For MK3 it needs to be 830 as it uses 32 microstepping, use this file instead.

Weight reduction is 121 g, from 387 g as default setup compared to 266 g for this setup (Extruder, motor)

This project is licenced under GPL V3 and the step-files will be available when we ship the first products.

Installation Guide

Buy Bondtech products from #Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!

Current Stock: 2


5 out of 5 (based on 1 rating)
leave a review

BEST upgrade EVER for Prusa MK3

Things have changed like night and day after this upgrade. The printer sounds smoother. The prints are more accurate, and the prints themselves are cleaner! AMAZING! And there is a printable upgrade to this at bondtech that will accomodate the MK3S upgrade!
Posted by Matthew Michalski, March 21, 2019